TFC EP02 Epoxy Resin Epoxy Casting Resin Thick Layer up to 100mm including Disposable Gloves - Size: 3kg Set (2000g+1000g)

TFC EP02 Epoxy Resin Epoxy Casting Resin Thick Layer up to 100mm including Disposable Gloves - Size: 3kg Set (2000g+1000g)

SKU: TFC23020030

64,90 €

21,63 € per 1 kg

incl. 19% VAT ,plus , Free shipping to DE.

Choose tax zone / country of delivery

Not in stock, will be ordered for you
Shipping time **: 7-9 Days* (DE - int. shipments may differ)

Description
Question about item

TFC EP02 Epoxy Resin Epoxy Casting Resin Thick Layer up to 100mm including Disposable Gloves - Size: 3kg Set (2000g+1000g)

TFC Troll Factory Epoxy Resin with Hardener | Free Disposable Gloves | 100 mm in One Pour | Thick-Layer Casting Resin
Set 3 kg (2 kg + 1 kg)

Epoxy resin has recently gained popularity, especially among hobbyists and artists. Due to its wide range of applications, there are many suppliers to choose from. This resin, however, is characterized by its high quality – Made in Germany – and its long-lasting, clear consistency.

Properties:

High-quality components: The ingredients are subject to strict quality controls.
Pouring height: Unlike other casting resins, this one allows 100 mm of pouring in one go without any waiting.
Flawless processing: The advanced UV stabilizing additive provides effective protection against yellowing – the product remains crystal clear over time.
Leak-proof: The bottles feature safety caps and an integrated dropper for added convenience.

Areas of application:

Jewelry design
Art supplies (paintings) Coating)
Furniture construction (epoxy resin tables)
Wooden surface finishing
Floor sealing
Model and mold making
Repair and renovation

Application instructions:

The correct mixing ratio (weight ratio - weigh using a scale): 100 g resin / 50 g hardener
Working time: at 18°C ??approx. 18 hours
Begins to cure after approx. 20 hours (depending on temperature)
Final strength after approx. 72 hours (depending on temperature)

Application tip:

Do not pour more than 100 mm of layer thickness per coat.
It is best to remove rising air bubbles approximately 10 minutes after pouring with a gas cartridge burner or a hot air gun.
The epoxy resin can take up to 3 days to cure, depending on the ambient temperature.

TFC Troll Factory wishes you lots of fun with your projects!

Note:

Severe temperature fluctuations or rapid temperature changes, e.g., during transport or storage in excessively cold conditions, may lead to crystallization:
The resin component may appear milky, cloudy, flaky, or white after hardening – depending on the stage and extent of the process.

By slowly heating the resin component to 60°C - 70°C (e.g., in a water bath) for 15 - 60 minutes, the crystallization dissolves, and the resin can be used without restrictions after cooling to room temperature. Even advanced crystallizations comprising more than 50% of the total amount can be dissolved without residue.

The potential for crystallization is inherent in the chemistry of the epoxy resin. It can be reversed at any time by heating and is not a defect. Once the crystallization has dissolved, the material can be used without restrictions.

Technical specifications:
Initial viscosity at 25°C: approx. 300 mPas
Specific gravity: 1.12
Pot life: 18 hours
Min. ambient temperature: 10°C
Max. ambient temperature: 28°C
Shore D hardness after 7 days at room temperature: 84
Size: 3kg set (2000g + 1000g)