Harder & Steenbeck

Spare parts

You can find an overview of the spare parts lists from Harder % Steenbeck here:

Evolution (PDF) Infinity (PDF) Colani (PDF)
     
Grafo (PDF) Ultra (PDF) Hansa Topline (PDF)
     
Hansa Hobbyline (PDF)    
   

Operating instructions

You can download operating instructions, lists of spare parts, connectors and colour cards as pdf.

Evolution (PDF) Infinity (PDF) Colani (PDF)
     
Grafo (PDF) Ultra (PDF) Hansa (PDF)
     
SPARMAX DC25 (PDF) SPARMAX TC 501N (PDF) SPARMAX TC 610H (PDF)
     
Euro-Tec 20-50 (PDF) Hansa Aero-Pro 20-100 (PDF) SPARMAX TC 63 (tc) (PDF)

Tipps / FAQ

Dear reader,
here we will publish tips and will answer some of the most commonly asked questions. This site will be updated frequently, so visit often. We hope that we will be able to help you out with our answers.

Problem

Possible cause

Solution

Airbrush sprays paint intermittantly

Airbrush is clogged, dirty

Clean airbrush thoroughly

Paint is too thick or lumpy

Dillute paint or get new/different paint

Insufficient air pressure

Increase air pressure

Bubbling in paint cup

Air cap is not tight

Tighten air cap

Nozzle seal is missing, dirty or defective

Replace or clean seal

Defective, frayed nozzle

Replace nozzle

"spider legs while air brushing"

Paint consistancy is too thin

Adjust paint consistency

Too much air pressure

Reduce pressure

Air brush is too close to the object

Hold air brush further away from object

Paint coat is too thick

Reduce paint coat with even sweeping motions across object

No air

Compressor is not "on" or defective

Turn compressor on or repair

Air hose is kinked

Straighten out air hose

Air hose connector is loose

Correct connection

Air pressure can't be regulated

Air valve sticks

Unscrew air valve and put a drop of oil on the small o-ring.