PK-Blue-Fast-(ShoreA80-Hard)-(200g)PK-Blue fast is a fast-curing, malleable silicone and is excellently suited for duplicating bits and small parts in the field of modeling.
It is ideally suited for the stamping technique, ie the creation and use of stamps.
Mixing ratio: 1: 1
Mixing time: approx. 30 seconds
Processing time: about 1 minute 30 seconds
Curing time: approx. 4 minutes 30 seconds
Processing temperature: 23 ° C (ideal)
Hardness after curing: Shore A 80
Maximum working temperature: 70 ° C
The indicated times refer to a room temperature of 23 degrees C and exactly maintained mixing ratio 1: 1.
At higher temperatures, times are shortened, extended at lower temperatures.
Use vinyl gloves for removal and mixing. Never use latex gloves, as these may increase or completely prevent the setting time.
When mixing with bare hands, the setting time may be shortened.
Suitable for casting Resin (synthetic resins), epoxy (Greenstuff, Milliput, Magic-Sculpt) and gypsum.
Not suitable for pouring liquid metals (tin)!
Scope of delivery
1x 100 g component A
1x 100 g component B
Shipping weight:0,24 Kg
Product weight:0,20 Kg
Question on item